







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pomona Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Pomona, which means we install, repair, and reface KraftMaid cabinetry without being tied to the manufacturer. What sets our KraftMaid work apart is that we treat the cabinet box, the door fronts, and the finish as three separate decisions, so you pay for the part that actually failed instead of an entire tear-out. We’re an independent provider, not an authorized KraftMaid dealer or factory-certified shop, and we say so up front.
Pomona’s kitchens span a wide range: pre-war bungalows near Lincoln Park, 1950s and 60s tract homes on the west side, and newer infill units along the 10 Freeway corridor. All three end up with the same cabinetry questions. Call (844) 320-5194 for a free estimate, and we’ll tell you plainly whether your KraftMaid boxes can be saved.
Why Trust Construction Pomona for Your KraftMaid Construction?

Our technicians have up to 8 years of experience working with KraftMaid cabinetry, and that time shows up in the details. We’ve handled the Vantage Series all-plywood boxes, the upgraded door and drawer fronts on the Deluxe Series, and the raised-panel and glazed finishes on the Expressions Series. We know the Recessed and Shaker door styles in both painted and stained finishes, and we know where each one tends to fail first.
That matters because KraftMaid is a framed and frameless platform with its own hinge patterns, drawer glide specs, and box depths. A part that “almost fits” will rattle, sag, or pull out of the screw holes within a year. We source quality parts that fit KraftMaid equipment, and when a genuine KraftMaid replacement door or drawer front is the right call for a solid box, we tell you so. Warranty-safe practice guides everything we do: we don’t drill new hinge locations into a door that’s still under coverage, and we document what we replaced and why.
We also keep the work in perspective. KraftMaid is one brand in our cabinet lineup, alongside Wellborn, and we pair cabinetry with Cambria, Silestone, and Caesarstone countertops when a kitchen goes beyond repair. One contractor relationship covers the cabinets, the counters, and the plumbing fixtures. That’s the whole point of how we’re set up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Pomona
These are the failures we see most often on KraftMaid cabinetry in Pomona homes. Each one has a cause, and each one has a fix that doesn’t always require new cabinets.
- Drawer box corner joints loosening under daily load. The dovetail or doweled corners in a drawer box take constant stress every time it opens and closes. Wider drawers carry more weight across the same joint, which is why the failure shows up on the big ones first. Vantage-series wide drawers are a frequent culprit. Re-jointing with proper clamping and adhesive restores most boxes; a box that’s split through the side panel usually needs replacement.
- Hinges sagging or pulling out at the screw holes in MDF-core doors. MDF holds a screw well until it doesn’t. Pomona’s dry summers and occasional winter rain create humidity swings that work screws loose over the years, and once a hole strips, the door droops and won’t close flush. Hinge-repair plates or a move to a slightly larger screw solve the common cases without touching the door face.
- Finish wear and peeling at high-touch edges. Painted finishes on Deluxe and Expressions doors take the most abuse at the pull edge, the top rail, and around the dishwasher. Peeling there is usually a prep or moisture issue rather than a bad paint batch. Spot refinishing matched to the original sheen is often enough; a door that’s peeling across the panel is a replacement.
- Particleboard or plywood sub-tops swelling under the sink. Base cabinet sub-tops are the first thing to go when a supply line drips or a disposal leaks. The material swells, delaminates, and pushes the cabinet sides out of square, which then throws off the drawer glides. Fix the leak source first, then assess whether the sub-top and the glides can be rebuilt or the run needs replacing.
- Doors and drawers that no longer align after a floor or counter change. New flooring or a countertop swap can shift the cabinet plane slightly. A full re-alignment of hinges and glides brings the faces back flush. It’s the cheapest fix on this list and the one most often skipped.
A typical KraftMaid kitchen call starts with a homeowner noticing a sagging drawer or a door that won’t close flush, often traced to loosened drawer-box joints or stripped hinge screws in MDF-core doors. The usual fix is to remove the failing drawer or door, reinforce the joint or install a hinge-repair plate, and replace the damaged fronts with OEM-matched KraftMaid parts if the box is still sound. When swelling or multiple joint failures appear, a qualified local pro will assess whether a partial reface or a full cabinet run replacement makes more sense.
KraftMaid Parts & Our Repair-vs-Replace Approach

We don’t stock KraftMaid parts, and we’re not a KraftMaid dealer. What we do is source quality parts that fit KraftMaid equipment: genuine KraftMaid replacement doors, drawer fronts, and hardware when the box is solid and the profile is still available, and matched aftermarket fronts when a profile is out of production or the budget points toward refacing.
The repair-versus-replace call comes down to the box. Re-hinging a door, re-jointing a drawer, replacing a single damaged front: these are smart moves when the cabinet box is square, dry, and structurally sound. Significant box swelling, water damage that’s pushed the sides out of square, or three or more failing joints in the same run usually means it’s time to replace the cabinet run rather than chase repairs. We give you that answer in writing, with the reasoning, so you’re not guessing.
If you’re weighing a repair against a reface, call (844) 320-5194 for a free estimate. We’ll look at the boxes first, because that’s what decides it.
Typical Pomona Cost Ranges
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
These are typical estimates, not quotes. The written estimate sets the final price for your Pomona kitchen.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every drawer in the run and check the corner joints, then test each hinge for pull-out and alignment. We check the sub-top under the sink for swelling and look at how the cabinets sit against the wall and floor. This is where we identify whether the issue is a front, a box, or the installation itself.
- 2
Repair or install. For repairs, we re-joint drawers, install hinge-repair plates, and swap damaged fronts with matched KraftMaid parts. For new KraftMaid installation, we check the wall for plumb and the floor for level before anything goes in, because a cabinet run set on an uneven floor will fight its own doors for years.
- 3
Test. Every drawer gets loaded and cycled. Every door gets opened and closed to confirm it seats flush against the frame with even gaps. We check that the glides track smooth under weight, not just empty.
- 4
Warranty. You get a written record of what was repaired or replaced, the parts used, and the date. If a genuine KraftMaid part was installed on a cabinet still under coverage, that paperwork is what protects you. We also explain what the manufacturer warranty covers versus what our workmanship coverage covers.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Pomona

We work on KraftMaid base cabinets, wall cabinets, tall pantry and oven cabinets, drawer boxes, and the full range of door styles in painted and stained finishes. That covers the Vantage Series all-plywood boxes, the Deluxe Series fronts, and the Expressions Series raised-panel and glazed doors. We handle cabinet installation and refacing, full kitchen remodeling, and kitchen design and layout, including the countertop and backsplash that sit on top of the cabinets.
If your KraftMaid cabinetry is part of a larger project, we can carry it through to the countertops with Cambria, Silestone, or Caesarstone, and to the fixtures with Kohler or Moen. Same relationship, same written estimate.
We Also Service These Brands
KraftMaid is one line we work with, not the only one. We install and service Kohler plumbing fixtures, GAF roofing systems, PGT windows and doors, and Master Halco fencing. If your Pomona project spans the kitchen, the roof, and the fence line, that’s one contractor relationship instead of four, and it means the countertop decision doesn’t get made in isolation from everything else.
FAQs – KraftMaid Construction Service in Pomona
No. We’re an independent KraftMaid service provider. We’re not authorized, certified, or affiliated with the manufacturer, and we’re not a KraftMaid dealer. We install, repair, and reface KraftMaid cabinetry using quality parts that fit it, and we handle warranty documentation honestly so you know what the manufacturer covers and what we cover.
Yes. We source genuine KraftMaid replacement doors, drawer fronts, and hardware when the cabinet box is solid and the profile is available, and matched aftermarket fronts when it isn’t. We don’t stock parts and we don’t claim to order OEM parts on demand. What we do is confirm fit before anything is ordered, so a replacement door lines up with the existing hinge pattern and finish.
Most single-drawer or single-door repairs are done in one visit. A full reface or a new cabinet run install takes longer, and the written estimate gives you the timeline before work starts. Scheduling in Pomona runs around summer heat and the winter rain window, so we’ll tell you up front if the season affects your date.
We cover base, wall, and tall cabinets, drawer boxes, door fronts across the Vantage, Deluxe, and Expressions Series, and the Recessed and Shaker door styles in painted or stained finishes. That includes installation, refacing, repair, and the kitchen design and layout work around them. If you’re unsure whether your cabinet falls inside that, describe it and we’ll tell you.
It can if the work is done incorrectly, which is why we follow warranty-safe practice: no new hinge locations drilled into a covered door, no modifications that change the box structure, and full documentation of parts and dates. We’re independent, so we can’t speak for KraftMaid’s warranty decisions, but we give you the paperwork that supports a claim.
Typical estimated ranges in Pomona run $4,000 – $13,000 for cabinet installation, $2,000 – $6,500 for countertop installation, $9,000 – $20,000 for a small kitchen remodel, and $14,000 – $45,000 for a full kitchen remodeling project. Those are estimates; the written estimate sets the final price. Call (844) 320-5194 for an exact quote on your kitchen. Estimates are free.
Book Your KraftMaid Service in Pomona, CA
Whether it’s a sagging drawer, a door that won’t close flush, or a full KraftMaid kitchen install, we’ll look at the boxes first and tell you what’s worth saving. Call (844) 320-5194 to schedule your free estimate in Pomona. Licensed and insured, written line-item quotes, fixed pricing with no change orders.
Written by the team at Construction Pomona.












