







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pomona Homeowners Choose Cambria Construction
We provide independent Cambria installation and service in Pomona – quartz countertops, kitchen islands, backsplashes, and vanity tops fabricated and installed by specialists who work with Cambria slab every week. That’s the short answer. What makes our Cambria work different is fabrication: diamond tooling for every cut and color-matched seaming adhesive instead of generic epoxy, which is where most Cambria jobs in older Pomona homes start to fail years later. We’re an independent Cambria service provider, not affiliated with or authorized by Cambria. Countertops, islands, and backsplashes from the driveway to the roofline, all through one contractor relationship. Call (844) 320-5194.
Why Trust Construction Pomona for Your Cambria Construction?

Cambria is engineered quartz, and engineered quartz punishes sloppy fabrication more visibly than natural stone. Every seam, every sink cutout, every polished edge is a decision made before the slab ever reaches your kitchen. Our installers are trained on Cambria-specific fabrication and sealing practice, not just generic stone cutting – how Britannica’s warm gold veining reads across a seam, how Ella’s white field hides or reveals a joint, how Annaleigh’s gold veins want to be book-matched on an island, how Blackwood’s charcoal face shows every fingerprint and haze.
We use quality parts and materials that fit Cambria slab: color-matched seaming adhesive, diamond tooling, proper seam support at cutouts. No genuine Cambria parts claims, no dealer status, no factory certification. Just work that respects the warranty and the material. When a seam or cutout is repaired correctly, the slab keeps performing. Our technicians have up to 8 years of experience working quartz surfaces in Pomona homes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cambria Construction Problems We Fix in Pomona
- Seam discoloration and lifting on Cambria islands. A dark line or slight lip appears where two slabs meet. The usual cause is generic epoxy seaming adhesive that shrank and grabbed dirt over years of use. Pomona’s hot, dry summers accelerate that shrinkage. Color-matched Cambria adhesive re-seams the joint level without tearing out the island.
- Edge chipping at sink cutouts and drop edges. Older Cambria slabs chip where the factory edge wasn’t properly reinforced during the original installation. The cutout is the weak point – every knife, pot, and casserole that hits the sink rim stresses it. A reinforced edge and polished repair usually fixes it.
- Surface dulling or etch-like haze on honed finishes. Acidic bathroom cleaners leave a cloudy film on honed Cambria, especially around vanities and backsplash transitions. The finish isn’t ruined – it needs proper cleaning and a re-polish, not replacement.
- Cracked or popped seams at backsplash corners. The 90-degree inside corner where a Cambria backsplash meets the countertop cracks or pops when cabinets settle or the seam lacks support underneath. Pomona’s clay-heavy soils move, and older cabinetry moves with them. Re-supporting the seam is the honest fix.
- Cracks running through the field of the stone. Rare, but when a crack crosses the middle of a slab rather than a seam or cutout, localized repair won’t hold. That’s the one case where a partial or full replacement makes sense.
Cambria Parts & Our Repair-vs-Replace Approach

We don’t stock or order genuine Cambria parts, and we don’t claim to – but we do use Cambria-approved color-matched seam adhesive and diamond tooling on every cut, because generic epoxy yellows under Pomona sun exposure through windows and fails faster on exterior-facing kitchen walls. That single material choice prevents most of the seam failures we get called out for.
Repair or replace? When a Cambria top is cracked at a seam or cutout, an honest seam repair or localized replacement is usually the right call. Full slab replacement only makes sense when the crack runs through the field of the stone. This is a Cambria quartz island job that often develops a visible dark line or slight lip at the seam – the original installer used generic epoxy that shrank and grabbed dirt over time. A qualified local pro removes the old seam material, cleans and dries the joint, re-seams the Cambria with color-matched adhesive, and clamps it level. No island tear-out. Call (844) 320-5194 to schedule a free estimate.
Our Cambria Service Process – Step by Step
- 1
Diagnosis. We inspect the Cambria slab, document every seam and cutout, check cabinet level and stability, and identify whether the issue is adhesive failure, edge damage, surface haze, or structural movement underneath. Written line-item quote follows.
- 2
Fabrication or repair. For new installs, slabs are cut with diamond tooling, edges polished, and cutouts reinforced before they leave the shop. For repairs, old seaming material comes out clean before any new adhesive goes in.
- 3
Installation and seam work. Color-matched Cambria adhesive, proper clamping, and seam support at cutouts and backsplash corners. Cabinets are verified level before the top goes down.
- 4
Test and hand-off. Every surface gets cleaned, sealed where appropriate, and checked for level, shine uniformity, and seam consistency. We walk you through care and cleaning so acidic products stay off honed finishes.
Workmanship warranty on our installations. Manufacturer warranty terms stay intact when fabrication follows Cambria specification.
See the difference
Before
After
Before
After
Before
AfterCambria Products We Service & Install in Pomona

We handle Cambria quartz kitchen countertops, island tops, backsplash panels, bathroom vanity tops, and bar tops across Pomona. That includes full fabrication and installation for new remodels, plus repair and re-seam work on existing Cambria installations. Kitchen remodels, bathroom remodels, and kitchen island installations all fall within our Cambria scope.
Common lines our installers work with include Britannica for warm modern and traditional Pomona kitchens, Ella for vanities and backsplashes, Annaleigh for islands and perimeter counters, and Blackwood for statement islands and bar tops. We don’t claim to stock these – we source and install to your project’s slab selection. No dealer relationship.
We Also Service These Brands
We’re not a single-brand contractor. Alongside Cambria, we install and service KraftMaid and Wellborn cabinetry, Kohler and Grohe fixtures, GAF roofing systems, and PGT windows and doors, plus Silestone and Caesarstone quartz when a project calls for a different surface. One contractor, every phase, from the driveway to the roofline.
FAQs – Cambria Construction Service in Pomona
Is Construction Pomona authorized by Cambria? No. We are an independent Cambria service provider and are not affiliated with or authorized by Cambria. We install and repair Cambria quartz using proper fabrication practice, quality parts that fit the material, and honest workmanship.
Do you use quality parts that fit Cambria equipment? Yes. We use Cambria-approved color-matched seaming adhesive and diamond tooling on every cut. We don’t stock or sell OEM parts, but the materials we use match what Cambria quartz is designed to be fabricated with.
How long does Cambria service take? A seam repair or backsplash fix is usually a one- or two-day job. A full countertop or island installation typically takes a few days to about a week, depending on slab templating, fabrication, and cabinet readiness. The written estimate sets the schedule.
What kinds of Cambria products do you cover? Cambria quartz countertops, kitchen islands, backsplash panels, bathroom vanity tops, and bar tops. Full fabrication and installation, plus repair and re-seam work on existing Cambria.
Will service void my Cambria warranty? Not when fabrication follows Cambria specification. We use their recommended seaming adhesive and cut practice so the warranty stays intact. If a repair can’t be done warranty-safely, we say so before any work starts.
How much does Cambria construction cost in Pomona? Typical estimated ranges: countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, kitchen island installation $3,000 – $10,000, bathroom vanity installation $800 – $3,000. The written estimate sets the final price. Call (844) 320-5194 for an exact quote – estimates are free.
| Cambria Service | Typical Estimated Range (Pomona) |
|---|---|
| Countertop Installation (Cambria quartz) | $2,000 – $6,500 |
| Backsplash Installation (Cambria backsplash) | $800 – $2,500 |
| Kitchen Island Installation (Cambria island top) | $3,000 – $10,000 |
| Bathroom Vanity Installation (Cambria vanity top) | $800 – $3,000 |
Book Your Cambria Service in Pomona, CA
If your Cambria countertop has a seam that’s lifting, a chipped edge, a hazy finish, or if you’re planning a new island or backsplash, call (844) 320-5194. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Written line-item quote, workmanship warranty, and Pacific-located scheduling. Estimates are free.
Written by the team at Construction Pomona.












