







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pomona Homeowners Choose Belgard Construction
Construction Pomona provides independent Belgard construction service in Pomona, CA: paver driveways, paver patios, retaining walls, porcelain pavers, and the repairs those systems eventually need. What sets our Belgard work apart is that we build and fix it around Pomona’s actual conditions – expansive clay soils, inland UV, and hard seasonal swings – instead of installing over whatever base is already there. Call (844) 320-5194 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
We are an independent Belgard service provider. We are not authorized, sponsored, or endorsed by Belgard, and we don’t present ourselves as a dealer. Our credibility comes from hands-on installation and repair work across the brand’s current and legacy lines, and from a straight answer about what your hardscape needs.
Why Trust Construction Pomona for Your Belgard Construction?

Belgard manufactures segmental concrete pavers, retaining wall systems, and porcelain pavers – products engineered to published specs and backed by manufacturer warranties. That combination is where experience matters. Our technicians have up to 8 years of experience with these systems, and they understand that the paver itself is rarely the weak point. The base, the drainage, and the edge restraint decide whether a Belgard installation holds its plane for twenty years or starts lipping in three.
Warranty-safe practice is the other half. We install to Belgard’s published guidance: proper excavation depth, graded aggregate base, correct compaction, and edge restraint on every perimeter. When we repair, we source genuine Belgard units and compatible OEM accessories so a patch matches the existing color and profile rather than sitting in the driveway as a visible scar. We use quality aftermarket polymeric sands and edge restraints where they outperform the original. Nothing gets covered, cut, or backfilled in a way that gives a manufacturer a reason to deny a claim. If you’re weighing a driveway, a patio, or a replacement in Pomona, call (844) 320-5194 and we’ll walk the site with you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Pomona
- Efflorescence and salt blooming on Mega Arbel and Catalina pavers. White, powdery haze appears on the surface after moisture migrates through the paver and evaporates at the face, leaving mineral salts behind. Pomona’s inland climate drives it: wet winters followed by hot, dry summers pull moisture up through the units. It’s a moisture-path problem first and a cleaning problem second, which is why scrubbing alone brings it back.
- Edge spalling and joint sand loss on Dublin Cobble driveways. Repeated vehicle traffic plus thermal cycling loosens joint sand and breaks down the leading edges. In most cases the underlying cause is inadequate base compaction – the surface moves slightly under load, and the joints take the punishment. Losing joint sand also opens the door to water infiltration, which accelerates everything else.
- Color fade and surface chalking on older Catalina and Mega Arbel pavers. Sustained UV exposure degrades pigment over time. Homeowners often assume it’s dirt or mineral film, but a paver that stays lighter after cleaning has chalked at the surface. This type of wear is cosmetic and affects color, not structural integrity.
- Paver settlement and lippage over expansive clay soils. When the base isn’t deep enough or drainage is poorly planned, clay movement lifts and drops individual units. The result is trip hazards, rocking pavers, and water pooling against foundations or garage slabs instead of draining away.
- Spreading edges on driveways and walls. Missing or failed edge restraint lets the whole field creep outward. Once the perimeter opens, joint sand migrates out and the failure spreads inward. Restoring the edge and re-sanding solves it early, while a neglected perimeter usually means pulling a larger section.
Belgard Parts & Our Repair-vs-Replace Approach

We source genuine Belgard pavers and compatible OEM accessories for repairs and expansions, so a new run of driveway matches the existing field in color and profile. For joint sand and edging, we’ll specify quality aftermarket polymeric sand and restraint where they hold up better than the original components. We don’t claim to stock Belgard inventory – pieces are sourced to fit your project.
The repair-or-replace call follows the base, not the surface. If the base is sound and isolated units are failing, targeted repair is the honest recommendation: pull the bad pieces, correct the setting bed, re-lay, re-sand, re-restrain. If settlement is widespread, if the field has lost its plane across the whole driveway, or if the base was never built for Pomona’s clay, a full replacement costs less over the next decade than repeated patches. We’ll tell you which one you’re looking at before any work starts. Call (844) 320-5194 for a free estimate.
Our Belgard Service Process – Step by Step
- 1
Site diagnosis. We walk the installation, check slope and drainage direction, probe the base where settlement shows, and look for efflorescence, spalling, or open joints. We identify whether the problem is surface, bedding, base, or water.
- 2
Scope and material match. For repairs and expansions, we identify the existing Belgard profile and color so sourced units blend. For new installs, we spec excavation depth against the soil conditions and plan drainage away from the house.
- 3
Repair or installation. Salvageable Belgard units come up intact. The base gets excavated to proper depth, re-compacted, and graded. Pavers go back on a fresh setting bed with new edge restraint and polymeric joint sand.
- 4
Test and inspect. We check for rockers, verify slope and drainage with water, confirm joint sand is fully packed, and inspect the perimeter restraint.
- 5
Warranty and handoff. You get the installation and material warranty documentation in writing, plus guidance on cleaning and re-sanding for Pomona’s climate.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Pomona
We service and install the full range of Belgard hardscape systems: segmental concrete pavers for driveways, patios, walkways, and pool decks; retaining wall systems for grade changes and planting terraces; and porcelain pavers for patios where a tighter, more uniform surface is wanted. That includes current lines like Mega Arbel, Catalina, Dublin Cobble, and Dimensions, and legacy Belgard products still underfoot across older Pomona properties. We handle repairs, expansions, re-sanding, edge restraint restoration, and efflorescence correction on existing installations, plus complete new driveway and patio builds.
We Also Service These Brands
Belgard is one part of what we do. We also work with Techo-Bloc, Cambridge Pavers, Unilock, and Tremron hardscape products, KraftMaid cabinetry, Kohler fixtures, GAF roofing systems, and PGT windows and doors. One contractor covers the exterior envelope and the interior living spaces, so a full-property project doesn’t require three separate relationships. Ask us how a Belgard driveway fits with the rest of your scope.
FAQs – Belgard Construction Service in Pomona

No. We are an independent Belgard service provider working with the brand’s products, and we are not authorized, sponsored, or endorsed by Belgard. Our work stands on hands-on installation and repair experience, not on a manufacturer badge.
Yes. We source genuine Belgard pavers and compatible OEM accessories for repairs and expansions, and we specify quality aftermarket polymeric sand and edge restraint where they hold up better. We don’t claim to stock Belgard inventory – materials are sourced to fit your project’s profile and color.
Most repairs are completed in a day or two, while a full driveway or patio installation typically runs several days depending on square footage, excavation depth, and weather. Pomona’s summer heat and the winter rain window both affect concrete and base work, so we schedule around them. Call (844) 320-5194 for a timeline on your specific scope – estimates are free.
We cover Belgard segmental pavers, retaining wall systems, and porcelain pavers, including Mega Arbel, Catalina, Dublin Cobble, and Dimensions lines as well as legacy products. That means driveways, patios, walkways, pool decks, and walls, plus repairs, re-sanding, and edge restraint on existing installations.
Not when the work follows Belgard’s published installation guidance. We excavate to proper depth, compact and grade the base correctly, and set edge restraint on every perimeter – the practices manufacturer warranties depend on. Call (844) 320-5194 with your questions before work begins.
Belgard paver work in Pomona typically runs $7,000 – $18,000 for a driveway, $3,500 – $11,000 for a patio, and $5,000 – $14,000 for a driveway replacement. These are estimated ranges; the written estimate sets the final price.
| Belgard Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Call (844) 320-5194 for an exact quote – estimates are free.
Book Your Belgard Service in Pomona, CA
If your Belgard driveway has settled, your Catalina pavers are chalking white, or you’re planning a new patio over Pomona’s clay, we’ll look at the site and give you a written, line-item estimate. Call (844) 320-5194. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price.
Written by the team at Construction Pomona.












