







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pomona Homeowners Choose Toto Construction
We provide independent Toto construction service in Pomona, and what sets our Toto work apart is that we plan the whole bathroom around the fixture instead of dropping it into a finished room. Toto’s WetStyle and Neorest lines are built on proprietary parts – the tornado flush valve, the bidet seat, the integrated electronics – and most general remodelers have never opened one. We read the model and serial plate, sort out which parts are user-serviceable and which are factory-only, and frame the bath around Toto’s actual rough-in and power needs. That matters in Pomona, where housing stock swings from pre-war bungalows near downtown and Lincoln Park to 1950s and 60s tract homes on the west side, and the plumbing in each wants a different plan.
To be clear about who we are: Construction Pomona is an independent Toto service provider. We are not affiliated with, authorized by, or a dealer for Toto. We repair, install, and service Toto equipment using quality parts that fit it. Call (844) 320-5194 for a free estimate.
Why Trust Construction Pomona for Your Toto Construction?

Toto products ask for a specific kind of attention. A Drake tank fill valve is not the same animal as the universal valve sold at a box store, and the flapper geometry on a close-coupled two-piece is tuned to the bowl’s flush curve. Our technicians have up to 8 years of experience with this, and they know the difference between a part that fits and a part that merely threads on.
Warranty-safe service is the other half of it. We don’t cut corners that a manufacturer would later point to as the reason a claim was denied. We use fasteners and seals meant for the fixture, we don’t improvise on electronic components, and we keep the install within the rough-in and power specs the unit was built for. If you’re in Pomona and your Toto needs work, whether it’s a single repair or a full bath rebuild around the fixture, you get one licensed contractor relationship for the plumbing, tile, vanity, and finish. That’s Insured & Bonded work and a written estimate before anything starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Pomona
Every fixture has its failure modes. These are the ones we see most often on Toto equipment, and what actually causes each.
- Fill-valve and flapper wear on Drake and Eco Drake tanks. Phantom running, a weak flush, or short-cycling that keeps the valve kicking on. A generic flapper swap doesn’t correct it because the fill valve is Toto-specific and the refill timing is set to the bowl volume. Replace with the wrong part and the toilet runs anyway.
- Wax-ring and flange misalignment on skirted or high-rough-in models. Toto’s skirted bowls and deeper rough-ins sit differently on the flange than a standard toilet, and a misaligned seal produces hidden leaks under the floor or slow seepage at the base. Often the only sign is soft subfloor or a recurring odor near the toilet.
- Washlet and Neorest electronic faults. A self-cleaning wand that stalls mid-cycle, a seat heater that stops warming, or a control panel throwing error codes. More often than not the root cause is moisture intrusion or a missing GFCI-protected outlet, not a failed unit. Get the power right and the electronics behave.
- Supply-line, angle-stop, and tank-to-bowl gasket degradation. Hard-water households pit the fill valve seat with mineral scale, which causes intermittent refill noise and pressure loss. The gasket between tank and bowl hardens over time and weeps. Both are cheap fixes done early and expensive ones done late.
- Electronic seat and bidet controls out of sync. On seat-attached bidet units, a mis-set control or a skipped calibration step makes the wand and dryer behave like they’re broken. We run the unit through its full cycle before we conclude the electronics are the problem.
Toto Parts & Our Repair-vs-Replace Approach

Toto’s fill valves, flappers, and wax seals are the only ones that match the bowl geometry and the flush curve. Aftermarket “universal” flappers are the single most common cause of a repeat Drake service call in Pomona.
We don’t claim to stock OEM Toto parts or to be a Toto dealer. What we do is source quality parts that fit Toto equipment and install them correctly, so the repair holds. On the repair-or-replace question: a Toto bowl outlasts most of the trim bolted to it. If the trapway and electronics are sound, we repair, because honest advice saves you the cost of a whole fixture. When the ceramic is cracked, the trapway is damaged, or the electronics are genuinely gone, we’ll tell you plainly and price a replacement. Either way it’s a written estimate, so you know the number before we start. Call (844) 320-5194 for a free estimate on your Toto repair.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We read the model and serial plate first so we’re working to the right spec, then test the actual behavior: flush cycle, fill timing, seat function, electronic cycles. For a full bath rebuild, we check the rough-in and available power before anything is ordered.
- 2
Repair or install. For repairs, we use Toto-specific fill valves, flappers, and seals. For installs, we set the bowl on a new wax seal at the correct flange height and pull the tank to check the supply line and angle stop before it goes back into service.
- 3
Test. We run the fixture through a full flush, refill, and electronic cycle. On a bidet seat or Neorest we verify wand, heater, and controls at the GFCI-protected outlet before we call it done.
- 4
Warranty and walk-through. We explain what we installed, show you the parts, and note the warranty terms so a future claim isn’t a question mark. If it’s a remodel scope, we walk the tile, vanity, and fixtures with you before we wrap.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Pomona

We service and install the Toto fixtures that show up in most Pomona homes: the Drake and Eco Drake two-piece close-coupled toilets, the dual-flush skirted Aquia, and the Neorest and Washlet bidet lines, both integrated and seat-attached. Alongside the fixture itself, we handle the remodel scopes that surround it – the tub-to-shower conversion, the bathroom vanity installation, and the tile and fixtures that finish the room.
That means a Pomona homeowner can price a walk-in shower, a new vanity, and a Toto installation in one conversation rather than three. We plan the bath around the fixture’s rough-in and power requirements from the start, so the toilet isn’t the thing that gets retrofitted at the end.
We Also Service These Brands
Toto is one brand in a much larger roster. We work with KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows and doors, among many others, so a full-home project doesn’t stall on a single manufacturer. If your project runs from the driveway to the roofline and includes the bathroom in between, one contractor covers it.
FAQs – Toto Construction Service in Pomona
No. Construction Pomona is an independent Toto service provider. We are not affiliated with, authorized by, or a dealer for Toto. We repair, install, and service Toto equipment with quality parts that fit it, and we don’t claim factory training or certification we don’t have.
Yes. We source fill valves, flappers, seals, and other parts that match Toto’s bowl geometry and flush timing. We don’t stock OEM Toto parts and won’t tell you we do, but the parts we use are chosen to fit the fixture and hold up, not generic “universal” substitutes. Call (844) 320-5194 for a free estimate.
A fill-valve and flapper repair is usually a short visit. A wax-ring reset with flange correction takes a bit longer. Electronic diagnostics on a Washlet or Neorest depend on what we find, and a full bath remodel runs weeks depending on scope. The written estimate lays out the timeline before work starts.
We cover the Drake and Eco Drake two-piece toilets, the dual-flush skirted Aquia, and the Neorest and Washlet bidet lines, both integrated and seat-attached. We also handle the tile, vanity, and shower work around them. Call (844) 320-5194 for a free estimate.
Correct service with parts that fit the unit shouldn’t give a manufacturer grounds to deny a claim, though the warranty terms are set by Toto, not us. We work within the rough-in and power specs the unit was built for and use parts meant for it, which is the sound way to protect a warranty. Call (844) 320-5194 with your model information and we’ll talk it through.
It depends on scope. A repair is priced per job. A remodel that surrounds the fixture falls into these typical estimated ranges, and the written estimate sets the final price:
| Service | Typical Estimated Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Those are estimates, not quotes. Call (844) 320-5194 for an exact quote – estimates are free.
Yes. The two things to plan are a GFCI-protected outlet within reach of the unit and enough clearance around the bowl. During a remodel is the right time to run that outlet properly rather than adding an extension cord later. Call (844) 320-5194 to price it.
Because the flapper is usually only half the problem. On a Drake, the fill valve is Toto-specific and sets the refill timing to the bowl volume. A replacement flapper that doesn’t match it, paired with a scaled fill valve seat, keeps the toilet running. A common scenario in Pomona goes like this: the toilet runs for a few seconds every 20 minutes and the tank never quite stops trickling. The usual culprit is a worn fill valve or flapper scaled by hard water, compounded by a wax ring that has shifted as the toilet settled. A qualified pro pulls the tank, replaces the Toto-specific fill valve and flapper, resets the bowl on a new wax seal at the correct flange height, and checks the angle stop and supply line before the fixture goes back into service. Call (844) 320-5194 for a free estimate.
They use a standard wax ring, but the flange height and alignment matter more on Toto’s skirted and high-rough-in models. Get it wrong and you get hidden seepage under the floor instead of an obvious leak. We set the bowl on a new wax seal at the correct flange height every time. Call (844) 320-5194 for a free estimate.
Yes, and that’s often the smartest way to spend the money. A healthy Toto bowl outlasts most of the trim around it, so we plan the new shower and vanity around the fixture’s rough-in instead of replacing a toilet that still has years left. Call (844) 320-5194 for a free estimate.
It can. Mineral scale builds on the fill valve seat and inside the wand, which causes intermittent refill noise, pressure loss, and a bidet wand that sprays weakly or stalls. A supply line or angle stop choking down makes it worse. Clearing scale early is a small job; letting it run is a replacement. Call (844) 320-5194 for a free estimate.
Book Your Toto Service in Pomona, CA
Whether it’s a running Drake, a Washlet throwing error codes, or a full bath remodel planned around a Toto fixture, we can help. Call (844) 320-5194. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and every job gets a written line-item quote.
Written by the team at Construction Pomona.












